Ashe Sapphire S2T TurretRead More
Sapphire S2T Turret Slitter Rewinders
The Sapphire S2T is the choice for the converter that is looking for maximum productivity and minimum downtime. This is achieved by the machine continuing to run, whilst the operator (or machine) takes off the finished rolls and puts new cores onto the rewind shaft.
The cycle time of the Sapphire S2T can be as low as 15 seconds and will automatically cut the web (at set length), and apply the new incoming web onto new cores.
Once again, the Sapphire S2T utilises our vacuum roller technology, and most options for minimising job setups can be added to the machine to increase productivity further. It also features a unique shaft support system (for larger rewind diameters) where the rewind shafts remain fully supported through the turreting sequence.
Ashe Sapphire S2Read More
Sapphire S2 Slitter Rewinder
The Sapphire S2 is the only choice for ease of operation, repeatability and minimal downtime. The machine is acclaimed for its versatility in being able to handle many different products, without any changes to the machine operation.
Our vacuum roller technology is a key feature of the machine, which requires no operator setting or maintenance throughout the life of the machine. The machine is also a total electric operation, no hydraulics are used in the machine.
The machine has a maximum running speed of up to 800m/min and can be equipped with many options for automation, which help in reducing setup times. It is also now available in three rewind diameter configurations, being 600mm, 800mm or 1000mm.
Ashe DiamondRead More
Diamond Duplex Rewinder
The Diamond model has been designed to be a compact, cost effective solution whilst keeping production requirements in mind. The machine has been based on our renowned Sapphire range of machines, and therefore has the flexibility to be able to slit and rewind most products at high speeds.
The machine is available in various configurations and all options within ASHE’s range are available to add onto the machine. The machine uses the ASHE vacuum roller technology and is hydraulic free, making it a total clean operation.
The machine is supplied in a ‘one piece’ configuration, therefore making shipping and installation easy.
Ashe SolitaireRead More
DUPLEX SLITTER REWINDER
As the sophistication in the narrow web industry expands, so should the ability to slit and rewind narrow web, particularly with the range of materials that a narrow web converters now use.
For this reason, the Solitaire series was developed some time ago. The machine is able to handle a wide range of products, from films through to papers, laminates and aluminium foils.
The technology on the machine has been taken from the Sapphire series, such as tension isolation through vacuum roller and fully automatic diameter control. Features to minimise downtime, such as laser core positioning are available on the machine, and for this reason is the perfect choice for the narrow web printer who convert a wide range of materials.
Ashe OnyxRead More
DUPLEX SLITTER REWINDERS
This versatile slitter rewinder is ideal for products like PP, PE and PET, and gives you a beautifully finished product. Low cost and easy to use, it’s ideal for start-up companies or those working to a tight budget.
Ideal when space is at a premium, the Onyx is a one-piece machine with unwind, electronics and pneumatics all integral, making installation quick and easy.
Grafisk Maskinfabrik HOTFB330Read More
HOTFB330 Standalone Hot Foil
Hot stamping and embossing adds the final touch to labels. Gold or silver effects combined with embossing
The GM type HOTFB330 is a 30 ton precision stamping machine for production of high quality labels. The machine can be used for foil stamping, embossing or one pass foil & embossing.
The best way to impress consumers, is the right combination of quality and beauty, and this is where the FB330 flatbed hot stamp unit from Grafisk Maskinfabrik will help you out. The HOTFB330 is an innovative unit that will give your labels an impressive and unique look-and-feel. On the matter of the quality of hot stamping, flatbed is the best choice, and on the matter of beauty, the FB330 can add intricate details of gold, silver or even holograms to your labels.
Furthermore, the HOTFB330 is not a one-trick-pony, it will do both hot foil and cold embossing to serve all your needs. Advanced features such as foil saver, servo-register and electronic temperature control & BST web-guide comes as standard.
Grafisk Maskinfabrik DC350
- NEW platform fully modular for added flexibility
- Jumbo roll unwinder with integrated roll lift
- Semi-rotary flexo
- GM SmartLam Multilayer option
- GM Automatic Slitting Station option
- GM Turret option
- STORCK rotary screen option for tactile labels
- Web-advance for fast roll change
- Runs inline with GM flat bed hotfoil
- Fully customizable and upgradeable
- Easy web access and maintenance
Grafisk Maskinfabrik DC330 NANORead More
Ultra Compact Converting
Ultra compact, cost effective unit for lamination, die-cutting and slitting. As digital label printing continues to grow, label-printing houses are realizing the need for all inclusive digital printing systems that provide value adding features for producing fully finished labels. The DC330NANO offers the ideal solution. The DC330NANO offers unwind, self-adhesive lamination, semi-rotary die cutting and length slitting on a compact 1.3m x 1.4m platform. The unit is ideal as converter for a small digital press or as a backup to an existing finishing line. The unit can run either offline or inline.
Grafisk Maskinfabrik LC330Read More
The LC330 is a compact, economic and fully digital laser finishing machine. Simply download the file from the pre-press department and the laser module is ready. The system can be fitted with an optional barcode reader for faster reload of existing jobs. The laser power ranges from 100-400 Watt (400-1000 Watt peak). It is possible to cut with different power levels on the same label. The standard LC330 has laser die, slitting and dual rewind. The unit is prepared for flexo varnish, spot varnish, lamination, cold foil and automatic knife box.
Grafisk Maskinfabrik DC330 HYBRIDRead More
Hybrid Laser and Semi-rotary Finishing
The DC330HYBRID is the perfect solution for digitally printed webs. Simply download the file from the pre-press department and the laser module is ready. It fits an optional barcode reader for faster reload of existing jobs. The laser module is an independent module that can be retrofitted into any DC330. The laser power ranges from 100-400Watt (400-1000Watt peak). The standard DC330HYBRID configuration has flexo varnish, lamination, slitting and dual rewinding built in. The DC330HYBRID can be combined with GM’s automatic knife system for digital production.
Grafisk Maskinfabrik DC330 MINIflexRead More
Compact Full Feature Converting
The compact full feature choice. Powerful yet economic finishing line with the smart essential options like GM Automatic Slitting Station and turret rewinder.
The flex is prepared for in-line operation with all major digital presses. The MINIflex adds full flexibility to the market-leading compact finisher DC330MINI.
By adding a fully customizable section the MINIflex offers the widest possible portfolio of special features.
Grafisk Maskinfabrik DC330 MiniRead More
Smart Compact Converting
This latest generation of the digital label finishing machine has been redesigned and features new electronics, a newly-designed control panel and an updated user interface. Based on the DC330 platform designed and improved over 8 generations – the DC330MINI NEW has a strong and extremely proven background.