Showing 1–12 of 34 results
Ashe DiamondRead More
Diamond Duplex Rewinder
The Diamond model has been designed to be a compact, cost effective solution whilst keeping production requirements in mind. The machine has been based on our renowned Sapphire range of machines, and therefore has the flexibility to be able to slit and rewind most products at high speeds.
The machine is available in various configurations and all options within ASHE’s range are available to add onto the machine. The machine uses the ASHE vacuum roller technology and is hydraulic free, making it a total clean operation.
The machine is supplied in a ‘one piece’ configuration, therefore making shipping and installation easy.
Ashe Labelstock/Paper Slitter RewinderRead More
Our Labelstock slitter rewinder is based on our Jade series of slitting machines. With centre surface capabilities the machine is able to wind with individual rewind stations, a full width differential rewind shaft, or with an airshaft. The shaftless or shafted rewinding system both utilise a linear tracking system away from the contact roller to give a perfect finished roll, in profile and tension.
As with all ASHE machines, our vacuum roller is utilised on the machine to give us perfect tension isolation and does not scratch or deform the most sensitive of labelstocks.
A range of options, such as automatic unloading systems are available on the machine with online roll wrapping, and weighing. Other options such as knife positioning systems, web cleaners etc are all available on the machine.
We are also able to produce a range of two drum surface winders, for paper mills and paper converters. We are able to produce such machines with rewind diameters of up to 1800mm.
Ashe OnyxRead More
DUPLEX SLITTER REWINDERS
This versatile slitter rewinder is ideal for products like PP, PE and PET, and gives you a beautifully finished product. Low cost and easy to use, it’s ideal for start-up companies or those working to a tight budget.
Ideal when space is at a premium, the Onyx is a one-piece machine with unwind, electronics and pneumatics all integral, making installation quick and easy.
Ashe Opal Inline and Offline Turret RewindersRead More
Label Inline and Offline Turret Rewinders
The Opal turret range gives you matchless results even for the most challenging of finishes. From our competitively priced applications right through to the advanced glueless technology, all machines are ideal for narrow web producers.
Your Opal can be set to run a given length or number of labels and will then cut and transfer the web without stopping. Each machine can run light or high tensions to allow a wider range of materials to run on one machine.
Ashe Opal SeriesRead More
Label Converting Lines
A wide range of solutions are available from ASHE for the die cutting of blank or pre-printed labels. Single or multiple die cutting stations are available on the Opal with or without a re-registration system.
Our servo controlled re-registration system is able to achieve tolerance levels of +/- 0.1mm on one, two or three stations.
Other technologies such as de-laminating / re-laminating stations are available along with 100% camera inspection systems. For the producers who look for continuous production, the machine can be supplied with our turret rewinder system, in either glue to core, or glueless configuration.
Ashe Sapphire S2Read More
Sapphire S2 Slitter Rewinder
The Sapphire S2 is the only choice for ease of operation, repeatability and minimal downtime. The machine is acclaimed for its versatility in being able to handle many different products, without any changes to the machine operation.
Our vacuum roller technology is a key feature of the machine, which requires no operator setting or maintenance throughout the life of the machine. The machine is also a total electric operation, no hydraulics are used in the machine.
The machine has a maximum running speed of up to 800m/min and can be equipped with many options for automation, which help in reducing setup times. It is also now available in three rewind diameter configurations, being 600mm, 800mm or 1000mm.
Ashe Sapphire S2T TurretRead More
Sapphire S2T Turret Slitter Rewinders
The Sapphire S2T is the choice for the converter that is looking for maximum productivity and minimum downtime. This is achieved by the machine continuing to run, whilst the operator (or machine) takes off the finished rolls and puts new cores onto the rewind shaft.
The cycle time of the Sapphire S2T can be as low as 15 seconds and will automatically cut the web (at set length), and apply the new incoming web onto new cores.
Once again, the Sapphire S2T utilises our vacuum roller technology, and most options for minimising job setups can be added to the machine to increase productivity further. It also features a unique shaft support system (for larger rewind diameters) where the rewind shafts remain fully supported through the turreting sequence.
Ashe SolitaireRead More
DUPLEX SLITTER REWINDER
As the sophistication in the narrow web industry expands, so should the ability to slit and rewind narrow web, particularly with the range of materials that a narrow web converters now use.
For this reason, the Solitaire series was developed some time ago. The machine is able to handle a wide range of products, from films through to papers, laminates and aluminium foils.
The technology on the machine has been taken from the Sapphire series, such as tension isolation through vacuum roller and fully automatic diameter control. Features to minimise downtime, such as laser core positioning are available on the machine, and for this reason is the perfect choice for the narrow web printer who convert a wide range of materials.
Enercon Corona Treatment: Blown FilmRead More
Corona Treaters For Films
Enercon’s blown film treater has been specifically designed to meet the needs of the standard blown film line head on. It is equipped with covered ground rolls and segmented stainless steel electrodes. A compact and simple construction allows for 2 sided and adjustable lane treating. The electrode system provides simple, trouble-free air-gap adjustment. Add in its economical price and you have a system that fits into any budget. For applications requiring greater system performance learn more about our standard Covered Roll treaters.
Enercon Corona Treatment: Ceramic Electrode for FilmsRead More
Corona Treaters For Films
Enercon’s ceramic electrode corona treaters are designed for conductive and non conductive films in printing, coating, & laminating operations, as well as blown and cast film lines where lane treating is not required.
High performance “H” system produces high definition, homogenous corona and the industry’s best insurance against backside treatment, film wrinkling and pinholing.
Enercon Corona Treatment: CoronaFlex™Read More
Improving ink adhesion has never been easier with the new CoronaFlex™ corona treater. It is specifically designed for high speed flexographic presses and versatile digital printing applications.
Corona treaters increase the surface energy of label stock to improve wettability and adhesion of inks and adhesives.
CoronaFlex™ offers OEMs and printers powerful and reliable corona treatment through a compact footprint, intuitive operator interface and industry leading application expertise.