Manufacturer

Filter Products Showing 1 - 12 of 270 results
Categories
Tags
  • Fife Electrohydraulic Power Units

    Specifically designed for web guiding, Electrohydraulic Power Units are ideal for use with Fife’s full line of electronic sensors and signal controllers. These power units incorporate our exclusive 2-stage, high-resolution, spool-type servo valve to provide precise, proportional control regardless of material or load requirements.

    Equipped with their own hydraulic reservoir, pump, filter, and relief valve, all standard models can be used for single, double, or triple guiding installations. By utilizing one or more servo valves, a single power unit simultaneously, yet independently, is capable of handling up to three separate guiding operations. For more than three, a combination of power units may be used

    Read More
  • Fife Pneumohydraulic Power Units

    Fife Pneumohydraulic Power Units are specifically designed for web guiding, providing superior response and control with fully proportional corrective action. Power units are equipped with our exclusive four-way, spool-type servo valve to deliver unmatched sensitivity and stability in guiding applications for all types of materials, at any speed, under any load.

    Completely self-contained, these Pneumohydraulic Power Units have a built-in regulated air system with a pump, filters, and regulator, as well as their own hydraulic reservoir, pump, filter and relief valve. External air is not required. Pneumohydraulic power units can be supplied with one, two or three servo valves on a single power unit. One power unit simultaneously, yet independently, can handle up to three separate guiding operations. For more than three guiding operations, a combination of power units may be used.

    Read More
  • Tidland Slitter Model SP-500 / MSP-A

    The Tidland Slitter Model SP-500 will help operators run more efficiently by increasing the speed and accuracy of knife positioning and minimizing the frequency and complexity of maintenance — two of the main factors in realizing a quick return on investment. This slitter provides the best mix of new technology and proven performance as it is designed to improve profitability and production efficiency by increasing positioning speed, accuracy, and consistency.

    Read More
  • Tidland ESP – Electronic Slitter Positioning System

    Designed to save downtime and increase productivity, Tidland’s ESP – Electronic Slitter Positioning System allows an operator to move 10 knives in under one minute with the web in place with accuracy of +/- 0.1 mm (0.004 inch) deviation.

    Created for use in mill finishing and other large-scale converting operations, the ESP delivers intuitive, easy-to-use touch screen interfaces and can retrofit to most winders regardless of web path. Typical materials include: coated and uncoated boards, tissue, newsprint and fine papers. This robust system has been specifically designed to perform reliably in the most demanding environments.

    The ESP’s modular design allows for easy upgrade from the manual version, and easy retrofitting into numerous brands of winders, offering the benefits of standardized parts. Converting to ESP’s automatic system affords the benefits of trim management, unlimited set pattern memory and computer software that is easy-to-use, and can be integrated into your mill-wide systems.

    Read More
  • Safety Accessories for Tidland Knifeholders and Blades

    There is no acceptable level of accidents, one is too many. That’s why we think about safety issues with every product we make. Innovations like our new blade guard provide extra protection and can be easily retrofitted to any Tidland slitter. Tidland Knifeholders feature a removable cartridge so blades can be more safely changed on a workbench. When you choose Tidland, you’ve made safety a key part of your selection criteria.

    360 Degree Blade Guard
    The 360 degree blade guard protects an operator from sharp blades while handling knifeholders off of the machine. Available for Class I, Class II, and Class III Tidland Knifeholders.

    Bench Mount Fixture and Safety Gloves
    Tidland’s convenient bench-mount fixture mounts easily to any workbench with two screws. It features a dovetail guide bar to hold the knifeholder cartridge securely and free up operator hands while performing basic maintenance on the knifeholder. Tidland safety gloves help to protect operator hands when working with sharp blades.

    Blade Guard Attachments
    Retrofit existing e-Knifeholders, Performance Series, Series C and other knifeholders with a low-cost blade guard to reduce operator injury. This guard is an inexpensive way to minimize the risk of operator injury while upper and lower knives are engaged. Each blade guard attaches directly to the existing knifeholder, acting as an extension to alert operators when they are too close to the blade, giving them more time to react.

    Read More
  • Tidland Performance Series Knifeholders

    Providing faster setups, increased productivity and unrivaled finished roll quality, the revolutionary Performance Series Knifeholder is available in three sizes to accommodate a wide range of slitting materials and web speed, for shear, crush and razor slitting of a wide range of applications, from very light converting to mill duty finishing operations. Operators can choose from a variety of design options, selecting a knifeholder specific to your needs.

    Read More
  • Tidland Control Series Electronic Knifeholders

    Maximize operator safety, productivity and roll quality with Tidland’s newest innovation in slitting. Featuring an LED-backlit touchscreen interface, enhanced durability and available wireless operation, the Control Series offers a dramatic improvement in knifeholder technology.

    Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

    The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.

    Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

    The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.

    Read More
  • Fife Pro-Trac 100 Electromechanical Sensor Positioner

    The Pro-Trac 100 is a low-cost, self-contained sensor positioner designed for standard-duty operations. Supplied with remote controller/digital readout, the Pro-Trac 100 is easily adapted to any process line for remote and/or centralized positioning capabilities.

    This positioner uses an extruded aluminum body, providing a maximum overall length of approximately 1651 mm (65 inches). The Pro-Trac 100 is ideal for any edge guiding or center guiding application. Whether used as a completely self contained unit or added to an existing guide installation, various sensor mounting adaptors make virtually any orientation possible.

    Read More
  • Fife Pro-Trac 200 Electromechanical Sensor Positioner

    The Pro-Trac 200 is a heavy-duty positioner engineered for continuous, reliable operation. Common application uses for the Pro-Trac 200 include chasing systems, moving-sensor center guide systems, web width measurement systems, or simple sensor positioning.

    Adaptable to almost any application, the Pro-Trac 200 features a dust-tight design, with ball bearings in all moving parts for low friction and extended operating life. Optional self-tracking cable carriers eliminate the risk of damaged cables. Available primarily as an electromechanical positioner, the Pro-Trac 200 is also available in hydraulic configurations.

    Read More
  • Fife Simplex H5530F Series Actuators

    The H5530F series is the newest addition to the SimPlex line of electro-mechanical actuators.

    Read More
  • Fife Kamberoller® Steering Guides

    The innovative KAMBEROLLER® Steering Guide delivers precise web or strip position by bending the web through a long entering span. This versatile guiding assembly provides immediate lateral correction for transient errors, while at the same time compensating for the web or strip steady state errors.

    KAMBEROLLER® steering guides are designed for dependable operation in the most demanding environments. They can accommodate high tensions and large variations in strip or web widths.

    Read More
  • Fife Kantiroller Steering Guides

    Durable and versatile, the Symat 50 electromechanical offset pivot guide is engineered to accommodate web widths up to 533 mm (21 inches) wide and tensions up to 623 N (140 lbs). This guide is ideal for edge, line, or center guiding applications where short entry and exit spans are required.

    Built for long-lasting, reliable operation, the Symat 50 delivers fast response for highly accurate web positioning This guide is available with standard roller faces of 203 mm (8 inches) to 610 mm (24 inches). Optional Servo-Center provides automatic guide centering to speed the setup and threading process.

    Kantiroller Steering Guides provide web position correction by bending the web through a long entering span. These innovative guiding assemblies provide immediate lateral correction for transient errors, while at the same time compensating for the web’s steady state errors.

    Powered either with an electromechanical actuator or hydraulic cylinder, Kantiroller Steering Guides are built durable for high-load capacity. Features include a single cast base, hardened racerod supports, and low-friction ball bushings. All guides are available with either single or double rollers.

    Read More