Fife

Filter Products Showing 1 - 12 of 13 results
Categories
Tags
  • Fife Electrohydraulic Power Units

    Specifically designed for web guiding, Electrohydraulic Power Units are ideal for use with Fife’s full line of electronic sensors and signal controllers. These power units incorporate our exclusive 2-stage, high-resolution, spool-type servo valve to provide precise, proportional control regardless of material or load requirements.

    Equipped with their own hydraulic reservoir, pump, filter, and relief valve, all standard models can be used for single, double, or triple guiding installations. By utilizing one or more servo valves, a single power unit simultaneously, yet independently, is capable of handling up to three separate guiding operations. For more than three, a combination of power units may be used

    Read More
  • Fife Pneumohydraulic Power Units

    Fife Pneumohydraulic Power Units are specifically designed for web guiding, providing superior response and control with fully proportional corrective action. Power units are equipped with our exclusive four-way, spool-type servo valve to deliver unmatched sensitivity and stability in guiding applications for all types of materials, at any speed, under any load.

    Completely self-contained, these Pneumohydraulic Power Units have a built-in regulated air system with a pump, filters, and regulator, as well as their own hydraulic reservoir, pump, filter and relief valve. External air is not required. Pneumohydraulic power units can be supplied with one, two or three servo valves on a single power unit. One power unit simultaneously, yet independently, can handle up to three separate guiding operations. For more than three guiding operations, a combination of power units may be used.

    Read More
  • Fife Pro-Trac 100 Electromechanical Sensor Positioner

    The Pro-Trac 100 is a low-cost, self-contained sensor positioner designed for standard-duty operations. Supplied with remote controller/digital readout, the Pro-Trac 100 is easily adapted to any process line for remote and/or centralized positioning capabilities.

    This positioner uses an extruded aluminum body, providing a maximum overall length of approximately 1651 mm (65 inches). The Pro-Trac 100 is ideal for any edge guiding or center guiding application. Whether used as a completely self contained unit or added to an existing guide installation, various sensor mounting adaptors make virtually any orientation possible.

    Read More
  • Fife Pro-Trac 200 Electromechanical Sensor Positioner

    The Pro-Trac 200 is a heavy-duty positioner engineered for continuous, reliable operation. Common application uses for the Pro-Trac 200 include chasing systems, moving-sensor center guide systems, web width measurement systems, or simple sensor positioning.

    Adaptable to almost any application, the Pro-Trac 200 features a dust-tight design, with ball bearings in all moving parts for low friction and extended operating life. Optional self-tracking cable carriers eliminate the risk of damaged cables. Available primarily as an electromechanical positioner, the Pro-Trac 200 is also available in hydraulic configurations.

    Read More
  • Fife Simplex H5530F Series Actuators

    The H5530F series is the newest addition to the SimPlex line of electro-mechanical actuators.

    Read More
  • Fife Kamberoller® Steering Guides

    The innovative KAMBEROLLER® Steering Guide delivers precise web or strip position by bending the web through a long entering span. This versatile guiding assembly provides immediate lateral correction for transient errors, while at the same time compensating for the web or strip steady state errors.

    KAMBEROLLER® steering guides are designed for dependable operation in the most demanding environments. They can accommodate high tensions and large variations in strip or web widths.

    Read More
  • Fife Kantiroller Steering Guides

    Durable and versatile, the Symat 50 electromechanical offset pivot guide is engineered to accommodate web widths up to 533 mm (21 inches) wide and tensions up to 623 N (140 lbs). This guide is ideal for edge, line, or center guiding applications where short entry and exit spans are required.

    Built for long-lasting, reliable operation, the Symat 50 delivers fast response for highly accurate web positioning This guide is available with standard roller faces of 203 mm (8 inches) to 610 mm (24 inches). Optional Servo-Center provides automatic guide centering to speed the setup and threading process.

    Kantiroller Steering Guides provide web position correction by bending the web through a long entering span. These innovative guiding assemblies provide immediate lateral correction for transient errors, while at the same time compensating for the web’s steady state errors.

    Powered either with an electromechanical actuator or hydraulic cylinder, Kantiroller Steering Guides are built durable for high-load capacity. Features include a single cast base, hardened racerod supports, and low-friction ball bushings. All guides are available with either single or double rollers.

    Read More
  • Fife Symat 50 Offset Pivot Guide

    Durable and versatile, the Symat 50 electromechanical offset pivot guide is engineered to accommodate web widths up to 533 mm (21 inches) wide and tensions up to 623 N (140 lbs). This guide is ideal for edge, line, or center guiding applications where short entry and exit spans are required.

    Built for long-lasting, reliable operation, the Symat 50 delivers fast response for highly accurate web positioning This guide is available with standard roller faces of 203 mm (8 inches) to 610 mm (24 inches). Optional Servo-Center provides automatic guide centering to speed the setup and threading process.

    Read More
  • Fife Symat 25 Offset Pivot Guide

    The Symat 25 is a compact, versatile electromechanical system engineered for narrow-web applications where short entry and exit spans are required. This offset pivot guide is available with three standard roller faces: 160.0 mm (6.30 inches), 200.2 mm (7.88 inches), and 250 mm (9.84 inches). The same dimensions are available for guide spans, and the maximum allowed tension is 156 or 200 N (35 or 45 lbs), depending on wrap style used.

    Designed with a cast base and precision milled parts, the durable Symat 25 increases productivity by minimizing downtime and waste. Depending on your needs and sensor(s) selected, this guide provides precise, reliable operation in edge, center, or line guide applications. Optional Servo-Center provides automatic guide centering to speed the setup and threading process.

    Read More
  • Fife SE-11 Infrared Sensor

    The SE-11 is the smallest of our infrared sensors. Its compact size and light weight make this sensor ideal for applications where accuracy is required, but space is limited. The SE-11 has a standard sensing gap of 1.0”, a control range of 0.20”, and is available in a 1% temperature compensated version. The optical design of the SE-11 allows for output linear to the web position in the control range, making it virtually unaffected by plane change. When used with CDP- 01 or POLARIS web guide controllers, the SE-11 is capable of guiding clear films with an opacity <10%.

    Read More
  • Fife DSE-17 Wide Band Infrared Sensor

    The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile, paper, foil, and for many opaque films. It can track up to 4 independent web edges simultaneously.

    When web width variations exist, the wide proportional band of the DSE-17 sensor eliminates the need for the manual repositioning of the sensor.

    Thanks to its IP-65 rating the DSE-17 can be installed even in the presence of water spray or condensation. The digital technique is immune to higher levels of contamination, compared with traditional analog sensors. The contamination of the sensor acrylic window can be monitored via a proportional analog output signal. An air sweep system is available as an option. In addition the DSE-17 sensor is protected against the influence of ambient light.

    Read More
  • FIFE-500 Web Guiding System

    Introducing the FIFE-500 web guide for narrow web and nonwoven applications. This cost-effective guiding system is easy to use and install, while using new technology to help you improve efficiency. At the heart of the FIFE-500 is a color touch screen that’s operator friendly, featuring icons and text in 16 languages to simplify operation and reduce the time necessary for training.

    FIFE-500 leverages the latest technology to improve performance and brushless motors to reduce maintenance. Faster core processing speeds mean that the FIFE-500 can adapt quickly to changes in the web, even at high line speeds.

    Read More